SYSTEM X RENEW

Review all directions and material safety data sheets prior to product usage.

Dilution ratio:

Use full strength

Directions

  1. Wash and clean surface to be coat. Dry Surface.

  2. Spray product directly on panel or microfiber cloth and buff into area with a circular motion. The product will flash (dry) immediately.

  3. Immediately after application, with the dry side of microfiber or separate buffing microfiber towel, buff off product residue.

  4. Wait 4 hours before getting wet. The product will fully cure in 24 hours.

For optimal results

  1. Use a clay bar to clean the paint/surface. Remove any unwatched scratches and imperfections.

Storage:

Protect from sunlight, do not store in direct sunlight.  Do not store below 32 degrees Fahrenheit, keep the product from freezing.

NOTICE: Seller makes no warranty, expressed or implied, of merchantability or fitness for a particular purpose, no liability for direct, consequential, or incidental damages beyond purchase price because the seller cannot control user's handling and use of this product.